ERTL Farm House Set

I picked up one of these online. The ERTL stuff is listed as 1/64th scale (same as the Machine Shed. See that here, here and here) but I think it runs a little big.

Here's a repainted Heroclix mini for comparison.

 and

It's a small-ish house but it works for me. Well... it WILL work as soon as I finish it. ;)

How will I finish it? 

Well..., I started by cutting down some left over illustration board to fit in as interior walls. They measure 1-7/8" high. The short walls are 4-1/16" wide and the longer walls are 6-9/16" wide.

Next, I cut them and placed them in the house to make sure they fit. Adjust/trim as necessary.

Next, I grab a knife and "score" into the board from the outside using the windows as my guide. You could use a pencil or pen here too, I just went in with the knife.

Then cut the windows all the way out.

Place them inside to see how well they work. As you can see in the picture below I also measured out the floor space and cut a piece of board to fit. Right now, since I haven't decided if I'm going to glue the walls in or not, I recommend cutting the walls first, then measure for the floor. This way when you place the floor in it helps to hold the walls in place. My idea is to be able to swap the walls out so that I can have different color walls or paneling or things like that.

Next I grabbed a bunch of coffee stirrers and started laying out a floor. The more narrow the better as far as I'm concerned.

I started by laying out 4 sticks and measuring them for the width of the interior floor. Then I started glueing the floor slats to the support sticks. I had to add extra support sticks periodically to help keep the sticks close together and to keep them from bowing or warping.

Next time I'm going to vary the pattern a bit more, this is a little to "patterny" for my tastes. It should look more like a hardwood floor.
Yeah... nitpicky... I know.

It does look pretty cool when placed inside the house.

That's it for now. Coming up I plan to:

  • Create another hardwood floor for the second level

  • Create the attic

  • Create a basement space

  • Paint the exterior of the house

  • Figure out how to make some better shutters
  • Make it so that the door can be opened. Maybe.
  • Make some interior walls that can be arranged in different configurations.

  • Create a stairwell

  • Make or buy some furniture

  • I'm sure there's more but I can't think of anything else right now.

Game Board

Awhile back I realized that I would never get anything done if I didn't figure out a way to focus on my projects. I start on a project, get about 1/4 of the way into it and think of how I could make something else. That would then draw my interest into the new project leaving the old one sitting on my desk. Repeat that thought process about a 100 times and you can paint a picture of what the studio looks like. I have an area of "to paint" miniatures, and an area of "to convert" miniatures, some random 1/48 scale cars to weather, a few 1/48 scale motor homes & ambulances to convert, a pile of white plastic fences that I'm building a gate for (that opens, of course), there's some mesh to make chain link fences, a box of o-scale train tracks, 4" card board tubes and fake brick to make some subway boards, some black grout and plastic strip that will eventually become a paved road set, boxes of 1/48 scale city building models to put together, and on and on and on...

So... my idea to focus came to me as a game board set. I figured I had most of the parts to set up a farm house and surrounding area.
I had made some wood fences .
http://confessionsofaminiaturemodeler.blogspot.com/2013/10/making-fences.html
I had bunch of trees and I had made the fields already.
The silo was painted.
http://confessionsofaminiaturemodeler.blogspot.com/2013/10/thrift-score.html
I had my Machine Shed.
http://confessionsofaminiaturemodeler.blogspot.com/2014/04/ertl-farm-country.html

And I found an Ertl farm house (which I had started working on how to add some interiors to). Most of my grass boards were in pretty good shape and I felt like this was my best shot at getting something done. There is a TON of stuff to do to it still but it's coming together.

The ERTL Machine Shed conversion Part 2

I built up the area around the door and added some side supports.

Then I sprayed the interior pieces with the metal spray. I'll have to write it down next time I go to the studio so I can post it here. I really like the look of it on the structures.

Some miniatures for scale purposes.

And the door pieces (again, I forgot my camera so no step by step pics).
I glued a thin piece of plastic down to the inside of the door, then added some strips of plastic to give it some depth.


Next I will add a black wash to the inside to give it more depth, then add some rust spots.

After that,  I have to mask off the interior and spray the exterior of the building and the roof.
And finally,  I have to create a poured cement floor for the interior.
And since nothing is ever really finished. I might add an interior office type structure, or some work rooms on one end, or along the side maybe? Dunno. We'll have to see what happens when I get closer to finishing.

The ERTL Machine Shed conversion Part 1

Recently, I posted about the ERTL Farm Country Machine Shed set. (http://confessionsofaminiaturemodeler.blogspot.com/2014/04/ertl-farm-country.html)
I'm really happy with the way it looks with all the 25-28mm/O Scale/1:48th mish mash of stuff I have going on so far. Once I finish I'll take some better pics for scale purposes.
So far, I've glued the roof pieces together and sprayed them with a gun metal-ish silver spray paint.
I had forgotten my camera for this step so there are no step by step shots. (I can't afford to waste any time in the studio by going back home to grab the camera). Here's the roof.
I plan to spray it with a dark(ish) green.

And the inside of the roof.

I scraped off the numbers and mold marks so that the interior would be smooth. Then I cut some strips of plastic and glued them on to give it some character.

Next I cleaned up the wall sections and glued them together.
Inside walls (you can see the circular mold marks)

 Outside walls

Then I took some of these drink stirrers (Not sure where I got these, which is a bummer because I can see lots of uses for them now) and cut them down to make support beams for the walls.

Pic of the stirrer support beams,

Then I used some plastic to cover up the joints.

I'll spray the interior with the gun-metal silver and the outside with white.
Here's a shot of it (mostly) together.

I still have to figure out the outer doors and the large sliding doors but it's coming along nicely so far.

ERTL Farm Country

I had read online that the ERTL Farm Country play sets were good for O scale trains.
I figured it should be close for wargaming minis (28mm-ish). Well... they aren't perfect exactly, but they sure are close. For $24.00 (plus shipping) I got the Machine Shed playset and I think it's pretty awesome. A little small but these things come in all different sizes anyway.
Next I want to get the Barn set, then the Farm House.

I'll clean them up and try to buildup the insides a bit where they lack some detail, then get them painted up and weathered. They're going to look great on the Farm board I've been working on.